DEVELOPMENT AND VALIDATION OF A STABILITY INDICATING RP HPLC METHOD FOR SIMULTANEOUS DETERMINATION OF VALSARTAN AND SACUBITRIL IN TABLET DOSAGE FORM
DOI:
https://doi.org/10.62649/Keywords:
Sacubitril, Valsartan, RP‐HPLC, Validation.Abstract
Objective: A New method was established for simultaneous estimation of Sacubitril And Valsartan by RP-HPLC method. Methods: Chromatographic separations were carried using Spurcil C18 (4.6 x 250mm, 5m) (Dikma column) column with a mobile phase composition of 0.1% OPA buffer and Acetonitrile(50:50) have been delivered at a flow rate of 1ml/min and the detection was carried out using waters HPLC auto sampler, separation module 2695 with PDA detector at wavelength 237 nm. Results: The retention time for Sacubitril and Valsartan were 3.119 and 6.851 minute respectively. The correlation coefficient values in linearity were found to be 0.999 and concentration range 12-60 μg/ml for Sacubitril and 13- 65µg/ml for Valsartan respectively. For accuracy the total recovery was found to be 99.98% and 100.28% for Sacubitril and Valsartan. The LOD and LOQ concentration for Sacubitril were found to be 0.02 µg/ml and 0.05 µg/ml and LOD and LOQ for Valsartan were found to be 0.01µg/ml and 0.04 µg/ml. The force degradation studies were performed and the results are within the limits. Conclusion: The results of study showed that the proposed RP‐HPLC method is a simple, accurate, precise, rugged, robust, fast and reproducible, which may be useful for the routine estimation of Sacubitril and Valsartan in pharmaceutical dosage form.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 D. Reshma Bhanu, M. G. Maddilety, S. Neelofar Sulthana (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.

